Products

Series Classification

UBD(S)H Series Low Pressure Glass Plate Level Gauge

UBD(S)H Series Low Pressure Glass Plate Level Gauge

UBD(S)H series glass plate level gauge is widely used in petroleum, chemical, boiler and other fields of medium and low pressure or open container liquid level observation, the use of optical principle directly display the liquid level position, easy to observe.

View Details →
UFSH series high-pressure, ultra-high-pressure two-color water level gauge

UFSH series high-pressure, ultra-high-pressure two-color water level gauge

UFSH series high-pressure and ultra-high-pressure two-color water level gauge is a direct reading instrument for monitoring water level in steam boilers or other pressure vessels with nominal pressure lower than 32MPa. It is a long window glass plate high pressure, ultra-high pressure water level gauge, compared with other two-color water level gauge, has the following characteristics: 1, observation single window length, window layout is reasonable, no blind area monitoring, water green steam red, clear boundary position. 2. The light source adopts a special cold light lamp, equipped with a special variable voltage dimmer, the user only needs to access 220VAC (or 36VAC) voltage, and the lamp emits uniform light, low energy consumption, long life, safety, energy saving and environmental protection. 3. The non-blind area water level gauge is to set two rows of windows in parallel on a meter body. Through optical principle conversion, the two rows of windows of the water level gauge can be viewed within the angle range of ± 3 degrees in front of the water level gauge. The red and green changes of the two windows can be observed at the same time, and the red and green are distinct, the interface is clear, and there is no blind area within the visual range of the water level gauge for continuous monitoring. 4. UFSH series water level gauge is made of stainless steel (2Cr13 when not specified by the user). 5. The water level gauge has its own valve, and the upper valve and the lower valve have safety ball protection devices, which are safe and reliable.

View Details →
FD type electric contact type water level gauge

FD type electric contact type water level gauge

FD(S, Z) type electric contact water level gauge is a kind of alternating pulse type electric contact type water level measuring instrument. It is mainly composed of sampling cylinder, ultra-pure ceramic electrode and secondary display instrument. It has good anti-interference ability and stability, with its wide detection range, simple operation, intelligent control expansion and many other characteristics. It is widely used in boiler drum, high pressure heater, deaerator, water tank, tank water level measurement and control; but not suitable for use in flammable and explosive and corrosive environment.

View Details →
Single and double color series quartz tube water level gauge

Single and double color series quartz tube water level gauge

Single, two-color series quartz tube water level gauge is a direct display of the liquid level of the local instrument. The two-color water level gauge directly displays steam red and liquid green by using the principle of light refraction and reflection, and can be widely used in high, medium and low pressure boiler steam drum and storage. At the same time, the water level gauge also has the advantages of simple structure, convenient maintenance, safety and reliability.

View Details →
UG series quartz tube type liquid (boundary) level meter

UG series quartz tube type liquid (boundary) level meter

UG series quartz tube liquid (boundary) level meter is developed according to the principle that different media have different refractive indexes to light waves. When the medium in the measuring container has liquid level, the liquid phase and gas phase range are clearly defined green and red respectively. When measuring the boundary level of the two media, the two media and the gas phase area above the media show three colors of green, red and blue from bottom to top, the observation effect is very striking. Quartz tube liquid (boundary) level meter has been widely used in petroleum, chemical, electric power, medicine and other fields.

View Details →
High temperature protective cover

High temperature protective cover

The equipment is made of stainless steel pipe and cast aluminum end cover. The compressed air is cooled by the vortex cooling pipe and then passes through the interlayer to achieve the cooling effect, and the wind curtain is formed on the front end cover to prevent dust. It has good anti-corrosion and anti-dust ability, and can be used in high-temperature dusty corrosive gas environment. To monitor the scene and control role, widely used in steel, cement, power and other industries in the high temperature special monitoring and high temperature isolation, to improve production efficiency, improve working conditions, reduce labor intensity.

View Details →
Lining of large equipment

Lining of large equipment

Lining material: F4, F40, PO, PE etc Lining thickness: ≥ 4mm Use pressure:-0.01MPa ~ 1.6MPa Steel pipe selection: national standard seamless steel pipe The maximum diameter can reach 6000mm, and the maximum height of each barrel can reach 5000mm (vertical and horizontal are not limited). The specific specifications and dimensions are made according to the requirements of user drawings.

View Details →
Steel lining PP, PO, PE and other series

Steel lining PP, PO, PE and other series

Nominal diameter: DN10 ~ 600mm Use temperature:-20~90 ℃ Use pressure:-0.01MPa ~ 1.6MPa Steel pipe selection: national standard seamless steel pipe HG, GB, JB, ANSI, JIS, BS, DIN and other standard flanges can be selected according to user needs, in order to facilitate pipeline installation. Can be processed into a looper for the user. According to user needs to produce all kinds of non-standard shaped pipe fittings.

View Details →
PTFE gasket and other PTFE parts

PTFE gasket and other PTFE parts

Our company produces all kinds of F4 tubes, F4 rods, F4 plates, pure F4 gaskets and all kinds of F4 packing shoes gaskets with complete specifications and reliable quality, and can be processed according to user needs.

View Details →
< 12345 > proceed page
Wuhan Hydron Instrument Technology Co., Ltd.
WeChat

WeChat

Official

Official

COOKIES

Our website uses cookies and similar technologies to personalize the advertising shown to you and to help you get the best experience on our website. For more information, see our Privacy & Cookie Policy

COOKIES

Our website uses cookies and similar technologies to personalize the advertising shown to you and to help you get the best experience on our website. For more information, see our Privacy & Cookie Policy

These cookies are necessary for basic functions such as payment. Standard cookies cannot be turned off and do not store any of your information.

These cookies collect information, such as how many people are using our site or which pages are popular, to help us improve the customer experience. Turning these cookies off will mean we can't collect information to improve your experience.

These cookies enable the website to provide enhanced functionality and personalization. They may be set by us or by third-party providers whose services we have added to our pages. If you do not allow these cookies, some or all of these services may not function properly.

These cookies help us understand what you are interested in so that we can show you relevant advertising on other websites. Turning these cookies off will mean we are unable to show you any personalized advertising.

Wuhan Haidelong Instrument Technology

Tel: 027-83252269

Mobile phone: 13618668054

Mobile phone: 13604241868

E-mail: xsb@haidelong.cn

Address: No.12, Jiutong Road, Cihui Street, Dongxihu District, Wuhan City, Hubei Province

Copyright©Wuhan Hydron Instrument Technology Co., Ltd.

Powered by www.300.cn  Privacy Agreement